Slider Controls
1. Position one, the beep and sunrise are both off.
2. Position two the Beep only, but no Sunrise.
3. Position three, only the Sunrise but no Beep.
4. Position four, beep and the Sunrise will both be on.
Important Notes
If you want to delete all the settings on your DawnLite
Natural Alarm Clock, simply remove and then re-insert the
battery from the bottom of the base unit.
Replace the battery once a year.
DawnLite Guarantee
The DawnLite is guaranteed against any manufacturing
defect for a period of 24 months from the date of purchase.
This is in addition to your statutory rights. To return the unit
please ensure that it is packed in it’s original carton and the
plug is prevented from moving to avoid damaging your
DawnLite.
Contact Us
Full Spectrum Lighting Ltd T/a S.A.D. Lightbox Company,
Lane End Business Park, Lane End,
High Wycombe, Bucks, HP14 3BY, UK
Email: [email protected]
Tel: +44 (0) 1494 88 33 08
Fax: +44 (0) 1494 88 33 41
Technical information
Specification subject to change without notice.
Supply 230V 50HZ
Lamp type G9 40W maximum
Safety EN60601
Class I Medical Device
Using your DawnLite Natural Alarm Clock
Using DawnLite as a Bedside Lamp or Reading Light
Press the Snooze Button then you use the + and
– buttons to adjust the intensity of the light.
Set DawnLite to a low level to use it as a night
light.
Starting your Sunrise
1. Once you have set the time and the Sunrise, check the
setting on the slider at the right side of the base unit. You
can choose whether you have:
a. just a Sunrise
b. just an alarm beep or
c. both a Sunrise and an alarm beep
2. Once you have set the Sunrise and the slider DawnLite will
start automatically
To Continue to Snooze
1. Once the sunrise has reached full brightness and/or the
beep goes off, you can snooze for a while by simply
depressing the snooze button. This will leave the light on,
but turn the beep off. The beep will sound again after 5
minutes.
2. You can repeat this five times - a total of 25 minutes.
3. To turn the alarm off and leave the light on, press the
Snooze and + button to turn the alarm off. Alternatively,
you can move the slider switch to Alarm Off position. (You
will need to switch it back to the required position in the
evening so that the DawnLite wakens you the following
morning).
Starting Your Sunset
1. If you want to create a sunset when you go to
bed or after you have been using the
DawnLite for reading or as a bedside lamp,
simply press the Sunset button and the
Snooze button together.
2. If you do not want a sunset after you have
been using the DawnLite for reading or as a
bedside lamp simply press the Snooze button
to turn the DawnLite off.
sunrise
sunset
snooze
B
o
th
S
u
n
ris
e
B
e
e
p
A
la
rm
O
ff
InstructionManual English 7/5/08 11:46 Page 7
