INSTRUCTION MANUAL FOR
NATURAL ALARM CLOCK
Introduction
Thank you for buying the DawnLite Natural Alarm Clock.
Each morning, DawnLite will brighten your room gradually
just like the rising of the sun, so that you wake in a natural
way feeling refreshed and ready for the day ahead. Doing so
can also help reset your circadian rhythms (or ‘body clock’) to
enhance the quality of your sleep, and relieve mild
symptoms of Seasonal Affective Disorder (S.A.D).
You can also use DawnLite at night to create your own sunset
and so promote deeper, more restful sleep.
Your Safety
• Do not remove the glass globe from the lamp unless the
unit has been switched off, and the globe has been
allowed to cool completely.
• DawnLite uses a 40W G9 halogen bulb.
• Keep away from water or damp conditions.
• Please do not open the base unit. There are no user
serviceable parts inside.
SETTING UP THE DAWNLITE NATURAL ALARM CLOCK
12 or 24 Hour Clock?
When you plug your DawnLite in and switch it on for the
first time, it will automatically start in 24 hour mode. To
change to 12 hour mode:
1. Switch it off for 5 seconds
2. Press and hold the ‘+’ button when you switch on again.
(Note After 12 midday in the 12 hour mode the bottom light
on the left side of the display will illuminate).
Setting the Time
1. Press and hold the Time Set for 2 seconds, the
hours will flash, you can then release it and use
the + and – buttons to set the hours.
2. Press and release the Time Set Button again
and the minutes will flash. Use the + and – buttons to set
the minutes.
3. Press and release the Time Set Button and the time is set.
Setting the Alarm Time
1. Press and hold the Alarm Set for 2 seconds,
the hours will flash, you can then release it
and use the + and – buttons to set the hours.
2. Press and release the Alarm Set Button again
and the minutes will flash. Use the + and – buttons to set
the minutes.
3. Press and release the Alarm Set Button and the alarm time
is set. (The alarm time that you set is the time when
DawnLite will reach full brightness and the alarm beep will
sound if it has been set.)
Setting Sunrise Duration
1. Press and hold the Sunrise for 2 seconds and
the minutes will flash. Use the + and – buttons to change
the duration of your sunrise. It can be set to 15, 30, 45 or
90 minutes. This is the length of time before the alarm
goes off when the light will start to come on.
2. The screen will flash with 15 i.e. the default setting is the
Sunrise to last for 15 minutes.
3. Press the + and – buttons to change the duration of the
sunrise. It can be set to 15, 30,45 or 90 minutes. Choose
one of these as the time you want to pass before the light
goes off completely.
4. To check this setting at any time just press and release the
Sunrise button and the time set will appear on the display.
Setting Sunset Duration
1. Press and hold the Sunset for 2 seconds.
2. The screen will flash with 15 i.e. the default
setting is the Sunset to last for 15 minutes.
3. Press the + and – buttons to change the duration of the
sunset. It can be set to 15, 30, 45 or 90 minutes. Choose
one of these as the time you want to pass before the light
goes off completely.
4. To check this setting at any time just press and release the
Sunset button and the time set will appear on the display.
ENGLISH
INSTRUCTIONS
time set
alarm set
sunrise
sunset
InstructionManual English 7/5/08 11:46 Page 5
