Sachtler Video 75 Plus Studio, Руководство пользователя

Страница: 15 / 34

- 9 -
Video 75 Plus Studio Manual
5.1 Conversion of the Video 75 Plus Studio to include
Touch & Go® quick release system with camera plate
35
Remove the fixation screw in the spindles top end.
Open the lock of the balance plate and keep on turning
the knob of the spindle to the left until you can remove the
balance plate.
Loosen the 4 screws (now visible) of the base plate under-
neath and remove it.
Get the EFP set up from the Sachtler accessory range.
With this set up it is likely that you have to remove the
Touch & Go® balance plate from the base plate first.
Release the camera plate from the EFP set up. Grasp the
locking lever with your thumb and index and pulldown the
red safety button.
Move the locking lever as far as possible to the left and
take out the camera plate.
Open the lock of the balance plate by pushing the
red lever underneath the balance plate to the left.
Turn the spindle knob of the EFP set up until you see an
Allen screw size 4 opening in the camera plate receptacle.
Take out this screw.
Open the 2 screws of the spindle fixation with Allen
wrench # 2 and remove the fixation piece.
Keep on turning the knob of the spindle to the left until
you can remove the balance plate.
Screw the base plate of the Touch & Go® balance plate
onto the head. Fasten the allen screws hand-tight.
Guide the balance plate with spindle into the base plate.