Sachtler Video 75 Plus Studio, Руководство пользователя

Страница: 11 / 34

- 5 -
Video 75 Plus Studio Manual
Á
Engaging or disengaging the right lever (small weight
symbol) will apply or release half a spring which will
help to select optimum counterbalance. When the
spring is engaged the lever should be in an upright
position, metal pin is not visible - if disengaged the
metal pin inside the lever is visible.
Á
With the Boost Button you can shift the range of the-
counterbalance. Switch on the Boost Button for hea-
vier camerakonfigurations (big weight symbol).
Please note: A lower counterbalance setting beco-
mes immediately effective in any tilt
position. An increase of the counter-
balance setting will only be effective
in the horizontal position (springs
must click in audibly).
3.7 Setting of the Damping
The Video 75 Plus Studio is equipped with nine damping
levels horizontally and vertically and a zero setting. By tur-
ning the vertical setting and the horizontal setting one sel-
ects the desired level of the fluid damping. Turn the set-
ting ring to ”0” in order to switch off the damping comple-
tely.
If you set the setting rings on the same index number
(e. g. ”3”) the degree of the horizontal and vertical dam-
ping is identical and thus enables precise diagonal pan-
ning movements without jerks and vibrations.
Make sure that you always turn the setting to the next
indexed position. Engage the retainer pins by slowly pan-
ning or tilting the camera.
ATTENTION:
Panning or tilting the camera with settings between the
indexed positions can damage the retainer pins and/or
disks.