1
2
3
5
4
6
7
11
10
9
8
7
6
5
4
3
2
1
0
Video 25 Plus:
Horizon Plus 16:
Horizon Plus 35
V 25 Plus FB:
tilt safety lock
- 1 -
Video 25 Plus / FB / Horizon Plus
Manual
Flange for view fin-
der extension
Vertical Setting of
fluid damping
Clamp for camera balance
plate
Battery holder for touch bubble level
Counterbalance knob
Horizontal brake
Touch bubble level
Clamping screw
of the fluid head
Safety lock of Touch &
Go system
Horizontal setting of
fluid damping
1
Safety instructions
➪
When the camera is mounted, the clamping screw of the
fluid head must only be released if camera and tripod are
secured against falling over.
➪
When placing the camera plate into the fluid head, make
sure not to hold fingers within the range of the locking lever,
since it will snap back.
➪
When releasing the vertical brake make sure that the camera
is secured against any sudden movement.
➪
Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
2
Operating elements
Vertical brake
Lock of Touch &
Go system
Rosette for mounting
pan arm
Level for 1/2
counterba-
lancesprings
150mm half ball
2 pan bars
brake in the front / bubble in the
back
Touch & Go plate: 16
viewfinder extension bracket
same as Video 25 Plus, but only
1 pan bar
same as Video 25 Plus, but only
1 pan bar and Touch & Go plate:
35
flat base. 2 pan bars
brake in the back / bubble in
frontTouch & Go plate: 35
without prompter thread
Fluid Head Specifications
Содержание Video 25 II
Страница 1: ...Video 25 II Manual...
