Sachtler SOOM, Оригинальное руководство

Страница: 17 / 38

- 12 -
SOOM
Manual
Anchor the Tube with the locking bolt in the ring
bowl of the TriSpread. Push the bolt all the way in
until blocked, then screw it clockwise until the
Tube is clamped in place.
Make sure a clamping bowl is mounted to the ring
bowl of the Tube.
Mount a fluid head, as described in chapter 3.6.
Mount a camera on the fluid head and balance it
(Instructions for balancing will be included in the
operator´s manual of your fluid head.)
Adjust legs to make sure the telecopic tube stands
upright.
Open the clamping lever of the extension tube and
raise the tube until you reach the desired height.
Close the clamping lever of the extension tube.
The SOOM XL System is now ready to use.
To dismantle, open the clamping lever of the
extension tube once more and lower the extension
tube slowly. Although there will be an air damping
effect that prevents the tube from coming down
too quickly, the lowering shall be conducted
manually with care.
Remove the camera from the fluid head.
If necessary, remove the fluid head from the
SOOM Tube.
Pull out the locking bolt in the ring bowl of the
TriSpread. Turn the bolt counterclockwise until it is
free. Once the unit is dismantled, a spring mecha-
nism will return the bolt to its starting position.