26
Operation
Transportation and storage
The column and skid may be separated to facilitate transport or
storage.
To separate the column and skid:
1.
Apply the brakes (11).
2.
Set the safety catch slide (6) to LOCK position (I) and fully
depress both columns until the safety catch engages.
4.
Remove the load and secure any trim weights in the trim weight
stowage.
!
WARNING!
Local, national or international regulations
may apply to the transport and storage of pressurized
pedestals, specifically, not to be classed as dangerous
goods under IATA regulation UN 1956 - Compressed
Gas Shipping. Pressure must be reduced to 2bar
(28psi) or less. See Service Bulletin V4002- 4990 for
further information and instruction.
!
WARNING:
Ensure the pedestal pressure is increased
to a minimum of 3.5 bar (50 psi) before attempting
to raise the column. This ensures that the elevating
mechanism remains in tension
WARNING!
Do not reduce pedestal pressure below 3.5
bar (50 psi).
To facilitate removal of the camera and mounting,
pressure should be reduced to 3.5 bar (50 psi).
