10
Installation
1.
Ensure that the rubber straps on each foot support (10) are to the
outside of the ball joint.
2.
Hold the column upright. Raise the struts (8 and 18) to about 30°
from horizontal. The strut joints are adjusted to retain the strut in
this position.
3.
Lift the column, align the fixed strut with the fixed leg of the skid
(there is also an engraving on the skid to assist aligning the
column) and carefully lower the column base into the skid centre.
Ensure that the struts engage with the ball joints on each foot
support and the steering tube locates in its socket.
4.
Secure the struts to the supports with the rubber straps
(10).
Column
Install the column on the skid as follows:
