8
Installation
Mounting to a Tripod
1 .
Apply the horizontal and vertical brakes and hold the head firmly
with one hand.
2 .
Remove the tie down and place the fluid head on the tripod refitting
the tie down loosely.
Touch Bubble
The fluid head is fitted with an illuminating touch bubble which allows
easy levelling in poor lighting conditions. The illumination is activated
by firmly tapping the bubble and will automatically switch off after
approximately 20 seconds.
Mounting the Fluid Head
The fluid head is designed to be installed onto Sachtler 100 mm
ball base tripods using the tie down. The fluid head can be mounted
directly to a pedestal using the threaded holes in the ball base or
using an adaptor available as an accessory.
