Sachtler DV 10 SB, Руководство пользователя

Страница: 14 / 26

- 8 -
DV 10 SB Manual
5 Accessories
5.1 Camera plates
The fluid head DV 10 SB is delivered with the Touch & Go
®
plate S (Code No.0364). It comes with a pin, 1/4” screw and
3/8” screw, means the cameraplate is ready to use it either with
a pin - 1/4” screw connection or a 1/4” screw - 3/8” screw
connection. Just unscrew the not needed screw from the came-
raplate. Spare camera screws are stored in the balance plate.
If your camera remains front- or back heavy after going through
the necessary centring procedure (paragraph 3.5) you may
solve this by using the C.O.G plate DV (Code No. 1465). This
plate offers you two removed positions (by about 44 and 72
mm resp.) to receive the camera.The C.O.G. plate DV can be
mounted removed to either the front or the back. It comes with
1/4” screw and pin.
5.2 Pan bars
The DV 10 SB comes with a single pan bar. There is a fixing for
an additional pan bar on the fluid head. Please order code no.
1075 for 2nd pan bar. If you prefer telescopic pan bars, please
order code no. 3470 (right pan bar) and 3471 (left pan bar),
respectively.
6 Inspection and Cleaning
You should clean your fluid head from time to time using a soft
clove. For heavier dirt you should use a soft brush and a mild
detergent. Regularely inspections are not prescribed.