Sachtler Cine 75 HD, Руководство пользователя

Страница: 11 / 28

- 5 -
Cine 75 HD Manual
Á
Engaging or disengaging the right lever (small
weight symbol) will apply or release half a spring which
will help to select optimum counterbalance. When the
spring is engaged the lever should be in an upright posi-
tion, metal pin is not visible - if disengaged the metal pin
inside the lever is visible.
Á
With the Boost Button you can shift the range of the
counterbalance. Switch on the Boost Button for hea-
vyer cameraconfigurations (big weight symbol).
Please note: A lower counterbalance setting beco-
mes immediately effective in any tilt
position. An increase of the counter-
balance setting will only be effective
in the horizontal position (springs
must click in audibly).
3.7 Setting of the Damping
The Cine 75 HD fluid head is equipped with nine damping
levels horizontally and vertically and a zero setting.
By turning the vertical setting and the horizontal setting
the desired level of the fluid damping can be selected.
Turn the setting ring to ”0” in order to switch off the dam-
ping completely.
If you set the setting rings on the same index number
(e. g. ”3”) the degree of the horizontal and vertical dam-
ping is identical and thus enables precise diagonal pan-
ning movements without jerks and vibrations.
Make sure that you always turn the setting to the next
indexed position. Engage the retainer pins by slowly pan-
ning or tilting the camera.
ATTENTION:
Panning or tilting the camera with settings between the
indexed positions can damage the retainer pins and/or
disks.