Sachtler Cine 75 HD, Руководство пользователя

Страница: 10 / 28

Manual Cine 75 HD
- 4 -
3.5 Positioning of the camera
Á
Hold the camera by securing the pan arm.
Á
Apply horizontal brake and release vertical brake and
tilt safety lock by pulling out the red knob and turning it
90°. A Green marking on the red knob becomes visible
(rocking the pan arms up and down will facilitate this).
Á
Select 0 on the vertical drag adjustment ring.
Á
Open the lock of the camera sliding balance plate.
On the Cine 75 HD you have to open the lever on the right
side of the head.
Á
By turning the spindle forwards and backwards move
the camera until you have reached a position where
the camera is balanced horizontally. Rear-heavy
cameras are moved to the front by turning the spindle
counter cockwise, front-heavy cameras are moved to
the back by turning the spindle clockwise. This will be
easier when the camera is held in a horizontal position.
Á
Secure sliding balance plate with clamping lever
(spindle drive is self-locking, clamping serves to elimi-
nate play).
Caution: If you can’t manage to centre the camera, you
should move the camera plate to a different
position on the tripod mounting adapter.
3.6 Adjusting the camera’s counterbalance
Á
Hold the camera by securing the pan bar. Turn the
counterbalance knob to that number which best com-
pensates for the weight of the camera.
Á
After each spring is released, check if the camera will
remain in a tilted position, without moving upwards or
downwards significantly.