Sachtler aktiv10, Руководство пользователя

Страница: 26 / 36

24
Operation
Additional C of G Adjustments
If it is not possible to correctly set the payload C of G using the
standard method:
1 .
Move the camera plate to offset the payload further in the required
direction.
2 .
Use the C.O.G plate (# 1465) which is available as an accessory
for the Touch & Go models.
Adjusting the Counterbalance
The fluid head is equipped with a 15 + 0 step counterbalance adjuster
to accurately balance the payload.
Moving the counterbalance from one setting to another
requires the head to pass the horizontal position to take
affect.
1 .
Set the counterbalance adjustment knob to the mid-range setting.
2 .
Tilt the payload approximately 30° in both directions and release
it. If the payload stays in the same position when released, the
payload is correctly balanced.