SAC Turbo-Max 6100 Series Скачать руководство пользователя

Страница: 7 / 82

Page # 7

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

SAFETY...YOU CAN LIVE WITH IT

EQUIPMENT SAFETY GUIDELINES

Every year many accidents occur which could have been avoided by a few seconds of thought and a more careful

approach to handling equipment. You, the operator, can avoid many accidents by observing the following precautions

in this section. To avoid personal injury, study the following precautions and insist those working with you, and you

yourself, follow them.

In order to provide a better view, certain illustrations in this manual may show an assembly with a safety shield

removed. However, equipment should never be operated in this condition. Keep all shields in place. If shield removal

becomes necessary for repairs, replace shield prior to use.

Replace any CAUTION, WARNING, DANGER or instruction safety decal that is not readable or is missing. Location of

such decals is indicated in this manual. The part numbers for the decals are located in the lower right hand corner of

the decal, and listed in this manual on the following pages.

Do not attempt to operate this equipment under the influence of alcohol or drugs.

Review safety instructions with all users annually.

Operator should be a responsible adult. DO NOT ALLOW PERSONS TO OPERATE OR ASSEMBLE THIS UNIT UNTIL THEY

HAVE READ THIS MANUAL AND HAVE DEVELOPED A THOROUGH UNDERSTANDING OF THE SAFETY PRECAUTIONS

AND PROPER OPERATIONAL PROCEDURES.

Do not paint over, remove, or deface any safety signs or warning decals on your equipment. Observe all safety signs

and practice the instructions on them.

Never exceed limits of a piece of machinery. If its ability to do a job, or to do so safely is in question DON’T TRY IT.

LIGHTING AND MARKING

It is the responsibility of customer to know lighting and marking requirements of the local highway authorities and to

install and maintain the equipment to provide compliance with the regulations. Add extra lights when transporting

at night or during periods of limited visibility. Lighting kits are available from your dealer or from manufacturer.

SAFETY SIGN CARE

• Keep safety signs clean and legible at all times.

• Replace safety signs that are missing or have become illegible.

• Replaced parts that displayed safety signs should also display current safety sign.

• Safety signs are available from your distributor, dealer parts department, or the factory.

How to install safety signs:

• Be sure that installation area is clean and dry.

• Decide on exact position before you remove backing paper.

• Remove smallest portion of split backing paper.

• Align decal over specified area and carefully press small portion with exposed sticky backing in place.

• Slowly peel back remaining paper and carefully smooth remaining portion of decal into place.

• Small air pockets can be pierced with a pin and smoothed out using piece of decal backing paper.

SAFETY

Содержание Turbo-Max 6100 Series



















































































Результаты поиска

Содержание Turbo-Max 6100 Series

Отзывы:

Похожие инструкции для Turbo-Max 6100 Series

Бренды по названию

Популярные бренды

SAC Turbo-Max 6100 Series, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание Turbo-Max 6100 Series

Отзывы:

Похожие инструкции для Turbo-Max 6100 Series

Бренды по названию

Популярные бренды