SAC Turbo-Max 6100 Series Скачать руководство пользователя

Страница: 14 / 82

Page # 14

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

•

Always use cured dry hay.

Tough hay can cause wrapping, binding and damage to the mixer and can adversely effect the

mixing performance. The following are some examples that contribute to tough hay conditions: high moisture content,

high grass content, high density bales,outdoor storage, use of hay preservatives, and excessive stem length.

HAY QUALITY

•

Do not overload the mixer!

Overloading causes excessive horepower requirements, increased strain on the

mixer driveline and poor mixer performance.

FILL LEVEL

MIXER OPERATION

Always refer to Equipment Safety Guidelines & Before Operation sections of this manual before operating this mixer.

•

The Turbo-Max Mixer was designed for blending dairy and beef rations. Most commonly used ingredients, including

limited amounts of dry stem hay, can be mixed quickly and uniformly in this mixer. If you have questions regarding your

feed ration or have other applications, please contact Sioux Automation Center, Inc.

•

Mixing performance can vary greatly according to the differences in materials, loading sequence, mixing speed, and

unloading methods.

GENERAL

•

When the mixer is in operation it has many moving parts which could cause severe injury or death to persons coming in

contact with these parts. To help avoid serious accidents, please read and understand this manual.

SAFETY

•

Do not load hay without

other dry commodities in the mixer first to act as a carrier or “lubricant”.

•

Do not overload hay content

, Sioux Automation Center Inc. recommends up to 15%-20% of hay by weight in the load.

Exceeding this percentage can decrease mixing performance or could potentially damage mixer and cause premature

wear on driveline components.

LIMITATIONS

•

Do not use tough hay

(20%-60% moisture) Always used cured, dry hay. Wet hay, foreign objects or overloading may

cause binding and damage to the mixer.

•

Keep in mind the overall size of the mixer

to allow clearance through doorways.

WARNINGS

•

The mixer can mix an average load in 3 to 5 minutes. Due to this short mixing time, there is normally no reason to run

the mixer during loading except to level the materials.

MIXING TIME

•

When deciding when and how fast to operate the mixer, factors such as ingredients being used, the thoroughness of

the mix, and the time available to mix must be considered. Normal mixing speed is 3/4 to full PTO speed.

•

Do not exceed rated PTO speed. When the mixer is operated faster than rated PTO speed the strain on the drive train and

mixer is greatly increased.

MIXING SPEED

MIXER OPERATION

•

The design of the Turbo-Max Mixer requires that there be adequate space to allow the feed to move in and around

the reel chamber. If the reel is completely covered, it cannot efficiently mix the materials. The reel cross tubes or

paddles should

always

be visible at the top of their rotation to allow this mixing space.

Содержание Turbo-Max 6100 Series



















































































Результаты поиска

Содержание Turbo-Max 6100 Series

Отзывы:

Похожие инструкции для Turbo-Max 6100 Series

Бренды по названию

Популярные бренды

SAC Turbo-Max 6100 Series, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание Turbo-Max 6100 Series

Отзывы:

Похожие инструкции для Turbo-Max 6100 Series

Бренды по названию

Популярные бренды