SAC T120, Инструкция по эксплуатации и обслуживанию

Страница: 57 / 80

T120C
51
2 - fasten the casing on the machine table to cover the cutter;
3 - loosen the thumbscrew until you can push the infeed strip, rotating it by 90
_
back-
wards;
4 - position the infeed strip at the height of the inlet ring, pressing it against the inlet ring,
and tighten the thumbscrew carefully. Later on proceed as indicated from point 11 to
17 of previous paragraph.
5 6
Fig. 31: Machining examples
Machining examples:
5 - Milling of a ring piece without feeder.
6 - Milling of a ring piece with feeder.