SAC T120, Инструкция по эксплуатации и обслуживанию

Страница: 28 / 80

T120C
22
10000 8000 6000 4500 3000 min
--1
N
N
3 2 1
L L L PE
DANGER
DO NOT REMOVE
SAFETY GUARDS. WHEN REMOVING THE FENCE
MAKE SURE TO FIT THE
PROPER SAFETY GUARD FOR ANY KIND OF MACHINING
Fig. 10: Terminal board.
3.4.2 Check of the rotating direction
Check the rotating direction of the spindle shaft starting the machine as described in
§ 4.7.1 (the shaft must rotate in the direction opposite the piece feeding).
If the shaft does not turn in the correct direction, it is necessary:
•
to cut the line off;
•
to revert two phases of the supply in the terminal board;
•
to try again the rotating direction
3.4.3 Connection with the suction system
It is indispensable to connect the machine to a suction system to eliminate the risks
from inhaling dust and to ensure a safe use and a proper machine operation.
Fig. 11 shows the positions of the suction inlets under the table and of the protecting
device for working at the guide.
Always operate with the suction system on.