Sabrent DS-UTC2, Руководство пользователя

Страница: 13 / 14

DS-UTC2
Note: The cloning process can take a couple minutes or up to 4 hours depending on the
Files/Disks that are being cloned
Finally press the power switch to the OFF position and eject your drives
7
A Blue LED will flash on 25% indicating
that the cloning process has begun
8
The cloning process is complete
when all the lights turn solid blue 25%-100%
13
Notes
• All data in HDD 2 will be deleted once offline clone starts.
• We highly recommend backing up all your data first before you clone your hard drive.
• Hard drives with bad sectors might not clone. Simply replace it with a new hard drive.
• If the capacity of HDD 2 is bigger than HDD 1, the capacity remaining in HDD 2 upon completion
of the offline clone will show up as Unallocated. Go into Disk Management on Windows/Disk Utility
on Mac and allocate the remaining capacity.
TROUBLESHOOTING/SUPPORT
Power LED does not come on?
• Make sure that you have a tight connection between the power adapter and dock.
• Try it on a different power outlet.
HDD LED does not come on or turns off during offline clone?
• Re-seat the hard drive into the bay.
• Try it on the second HDD bay
• Swap the hard drive out with a spare.
Cloning process will not start?
• Power off the dock, re-seat drives, power back up and try again.
• Check if the capacity of HDD 2 is larger or equivalent to that of HDD 1.