Sabo SA561022, Руководство оператора

Страница: 32 / 72

32
WARNING
If any of the parts are damaged or missing, wait until the parts have been replaced before using the device. Using this product with damaged or missing parts can lead to serious injuries.
WARNING
Do not try to modify this device or attach accessories that have not been recommended for this device. Any changes or incorrect use of this device can be very risky and lead to possible
serious physical injuries.
WARNING
In order to avoid injuries, always remove the battery from the device before fitting parts.
ATTACHING THE GRASS DEFLECTOR (11)
See figure 1 and 2
WARNING
The cut-off blade (8) attached to the grass deflector (11) is sharp. Avoid contact with the blade. Contact can lead to serious injuries.
Never use the device with a defective or missing grass deflector.
·
Remove the battery.
·
Turn the string trimmer so that you can reach the trimmer head (10).
·
Remove the fixing screws for grass deflector (12) with a Phillips screwdriver (not included).
·
Attach the grass deflector (11) to the trimmer head.
·
Align the screw holes on the grass deflector with the screw holes on the trimmer head.
·
Tighten the screws (12).
WARNING
Even if you know the device well, the highest caution must be taken when using it. Even a momentary lapse of attention can result in serious injuries.
WARNING
When using a power tool, always wear safety goggles with side protection. Failure to wear this equipment may lead to objects hitting you in the eyes, resulting in serious injuries.
WARNING
Never use blades, hammering devices, wires or ropes on this product. Do not use attachments or accessories that are not recommended by the manufacturer of this device. Using
attachments or accessories that are not recommended can lead to serious injuries.
ASSEMBLING THE SHAFT
See figure 3
·
Loosen the bottom screw on the coupler with the allen wrench (13).
·
Press the release button (14) on the lower shaft (7).
·
Press and hold the release button (14) while pushing the lower shaft (7) into the coupler (6).
·
Rotate the lower shaft (7) until the release button (14) engages in the positioning hole (15).
· Manually tighten the bottom screw on the coupler with the allen wrench (13).
ATTACHING THE AUXILIARY HANDLE
See figure 1 and 4
· Loosen the connecting screw for auxiliary handle (17) from the auxiliary handle (4).
·
Position the metal ring (16) on the lower shaft (7) and align it with the auxiliary handle (4).
·
Attach the auxiliary handle (4) to the lower shaft (7) above the metal ring (16).
·
Adjust the auxiliary handle (4) to a position that is comfortable for you.
·
Tighten the connecting screw for auxiliary handle (17).
9 COMMISIONING
· Hold the string trimmer in your right hand by the rear handle (3) and hold the auxiliary handle (4) in your left hand.
·
Hold the device tight during use.
·
The string trimmer should be held in a comfortable position.