Sabo 54-K VARIO B, Руководство оператора

Страница: 71 / 118

15
GB
Before every operation
• Check the lawn area and remove any objects.
• Check the area of the boundary wires (if an auto mower is being used for lawn care).
• Check the oil level Y1 .
• Check the condition and firm fit of the blade, if necessary have an authorised workshop tighten the blade screw.
• Check whether the safety control bar for the blade brake is working perfectly.
• Check that all protective devices have been attached properly and are not damaged.
• Check grass collecting equipment for wear or loss of functionality.
Every 10 operating hours
• Check all screw connections for a tight fit.
• Check the fan, blade coupling and fan housing regularly for wear and a tight fit.
After every operation
• Clean the mower.
• Check the blade for damage and wear.
Running-in time – after the first 8 operating hours
• Change the engine oil Y1 .
Every 25 operating hours or every three months
• Clean the pre-filter W .
• Clean the spark plug and adjust electrode distance Y .
Every 50 operating hours or once a year
• Change the engine oil Y1 .
• Lubricate or grease the wheel bearings.
Every 100 operating hours
• Clean the air filter paper insert W .
During annual servicing
• Have the air filter paper insert and pre-filter replaced W .
• Have the spark plug replaced Y .
• Clean the gearbox and the area under the belt cover.
• Check the drive throttle cable and adjust it if necessary.
• Check the control bar, blade-brake cable, switch-on lever of the cutting unit with cable and the engine brake and have
these adjusted if necessary.
18 CARE AND SERVICING OF YOUR LAWNMOWER
Regular care is the best guarantee of long working life and trouble-free operation!
Only use original spare parts because only those guarantee safety and quality!
Safety instruction!
See table for explanation of symbols page 3
Cleaning (Illustration O )
IMPORTANT
During cleaning and maintenance work, close the fuel tap Y2 , place the mower on its right-hand side, or even
better tilt it forwards O (spark plug facing upwards) as otherwise start-up difficulties could occur. When tilting the
mower forwards make sure the ejection flap does not get damaged. Secure the mower in its raised position!
CAUTION
When tilting the mower upwards or placing it on its side, make sure no oil or petrol escapes. Fire hazard!
Remove dirt and residual grass directly after mowing. Use a brush or cloth for cleaning.
CAUTION
Do not insert your fingers into the openings in the fan housing and hold the fan. If the cutter bar is turned during
cleaning, there is a risk of fingers being squashed between fan and fan housing.
IMPORTANT
Never use high-pressure cleaners or a normal water jet to clean the drive area, engine parts (such as ignition
system, carburettor etc.), seals and bearing points. Damages or expensive repairs can be the consequence of such
action.
IMPORTANT
Keep the gearbox area free of dirt. All moving parts must be free of dirt.