6
Section One : Introduction
SECTION ONE : INTRODUCTION
Congratulations on purchasing a Sabine True Mobility™ Wireless System. True Mobility™ Wireless
Systems give you all the built-in processing you need on every microphone.
1.1 Using this Operating Guide
This operating guide covers all Sabine True Mobility™ Wireless Systems — model numbers SWM3000
and SWM1600 — and contains full explanations for everything you need to operate your True Mobil-
ity™ Wireless system.
Section 2
shows front and back panel views for your True Mobility Wireless receiver.
Section 3
lists system components.
Section 4
gives the Quick Setup procedures for Receiver & Transmitter Operation and using the
FBX Feedback Exterminator
®
. Note that there is also a quick-start label on top of your
True Mobility receiver for the Sabine FBX Feedback Exterminator
®
, Compressor/Limiter
and De-Esser functions.
Section 5
details receiver and transmitter installation and setup.
Section 6
explains the how and why of Sabine’s FBX technology, and gives a complete understand-
ing of how to set up your FBX filters.
Section 7
details the True Mobility’s De-Esser.
Section 8
explains the use of the Compressor.
Section 9
gives tips on how to get the best performance from your Sabine Wireless, and describes
some possible operating problems and their solutions.
Section 10 has frequency charts for all currently available Sabine Wireless systems.
Section 11 contains information on how to modify your True Mobility’s FBX filters (NOTE: these
procedures are to be performed by qualified personnel only), transmitter wiring
schematics, and engineering specifications for your Sabine Wireless.
Section 12 states caution and warranty information for your True Mobility™ Wireless system.
1.2 System Description
Sabine True Mobility™ Wireless Systems come in UHF and VHF models, with many accessories to
complete your system packages. Both systems include state-of-the-art Phase Locked Loop (PLL)
synthesized transmitter and receivers, True Diversity reception, dual-squelch circuitry, excellent noise
rejection and superior dynamic range. Microphone transmitter configurations consist of handheld,
lavalier, or headset styles. Sabine True Mobility™ Wireless UHF and VHF systems offer optional
front or rear mount antennas, extension antennas, and antenna divider systems.
Sabine Wireless Systems are superior to conventional systems because we include the two most
comprehensive features found in any wireless system: True Mobility and Targeted Input Process-
ing.
We call our system True Mobility because it provides the freedom you should expect from a wireless
system. With a conventional wireless system, your range of movement is limited by the potential for
feedback in acoustical “hot spots.” Some areas are so feedback prone you cannot go near them at all.
Other areas allow only minimal gain before feedback occurs. Until now, freedom from mic cables
meant more likelihood for feedback.
Fortunately, that has changed. Sabine’s True Mobility system includes our patented, industry-stan-
dard FBX Feedback Exterminator
®
. Your microphones will sound loud and clear without feedback,
and with a greatly increased area of feedback-free movement. This is the freedom you were seeking
when you chose a wireless system.
Sabine’s True Mobility doesn’t stop with automatic feedback control. Conventional wireless systems
require the added cost of outboard equalizers, compressor/limiters, and de-essers to maximize perfor-
mance.
Содержание TRUE MOBILITY WIRELESS SYSTEM SWM3000
Страница 2: ......