Saber Compact R67SB0312, Инструкция по сборке и эксплуатации

Страница: 16 / 84

16
WARNING
LIGHT OPERATION INSTRUCTIONS
?
Do not let the electrical supply cord hang over the
edge of a table or touch any heated surface.
?
Use the shortest length extension cord required.
?
Do not connect 2 or more extension cords
together.
?
To protect against electrical shock, do not
immerse cord or plugs in water or other liquid.
?
Unplug from the outlet when not in use and before
cleaning. Allow to cool before putting on or
taking off parts.
?
Do not operate grill with a damaged cord, plug or
after the appliance malfunctions or has been
damaged in any manner. Contact the
manufacturer for repair.
?
Do not use an outdoor cooking gas appliance for
purposes other than intended.
?
When connecting, first connect plug to the
outdoor cooking gas appliance then plug
appliance into the outlet.
?
Never remove the grounding plug or use with an
adapter of 2 prongs.
?
Use only extension cords with a 3 prong
grounding plug, rated for the power of the
equipment, and approved for outdoor use with a
W-A marking.
IMPORTANT
?
Since 1971 the National Electrical Code (NEC) has
required Ground Fault Interrupter devices on all
outdoor circuits.
?
If your residence was built before 1971, check with
a qualified electrician to determine if a Ground
Fault Interrupter (GFI) protector exists.
?
Do not use this appliance if the circuit does not
have GFI protection.
?
Do not plug this appliance into an indoor circuit.
Light Operations
1. Make sure light switch on the control panel is in the “OFF”
position. The button should be flat with the rim.
2. Connect the light plug to a GFI outlet. Reference Part 3,
Electrical Transformer, in the installation instructions for
recommended placement of the GFI outlet.
3. Turn the light switch to “ON” by pressing the button. Turn
“OFF” by pressing the button again.
OFF POSITION
ON POSITION