Saber Compact K00AA3314, Руководство по эксплуатации продукта

Страница: 9 / 10

Problem Possible Cause
Prevention/Solution
Troubleshooting
Unit does not operate.
The Unit is not plugged in.
Circuit breaker is tripped or a fuse is blown.
The unit’s temperature control is set to
“
OFF ”.
Plug the unit into an operational electrical circuit and retry.
Reset the circuit breaker or replace the fuse. If circuit breaker trips
again, of if fuse blows again, stop and call a certified electrician to
troubleshoot the problem.
Adjust the temperature control to the “5” position and retry.
Unit turns on and off
frequently. The ambient temperature is hotter than
normal.
A large amount of food has been added to
unit.
The door is opened frequently
The door is not completely closed
The temperature control is set too low.
The door gasket is not sealing properly.
High ambient temperatures will cause the unit to cycle more
frequently
The unit must cycle more frequently to cool a large amount of food.
Do not open the door as frequently.
Ensure no obstructions are holding the door open.
Raise the temperature control to a higher setting.
Clean and inspect the door gasket for damage. ensure no
obstructions are holding the door open. If the door gasket is
damaged, replace the gasket.
Vibrations
The unit is not level.
Island components are in contact with the
unit.
Check to make sure the unit is level.
Be sure recommended clearances are maintained.
The unit is noisy. A rattling noise may result from the flow of
refrigerant.
As each cycle ends, you may hear a
gurgling noise from refrigerant flow.
Contraction and expansion of the interior
walls.
The unit is not level.
This is normal
This is normal
This is normal.
Check to make sure the unit is level.
The door will not close
properly. The unit is not level.
The door was reversed and was not
properly installed.
The door gasket is dirty or bent.
Shelves, bins, baskets, or food may be
blocking the door.
Check to make sure the unit is level.
Check to make sure the door was properly installed.
Clean the gasket or replace it if damaged.
Reposition items inside to ensure the door will close properly.
9