9
CONTROL BOX MANUAL
K-ECO LIFT
Programming the VP (Viewing Position)
ATTENTION! You have to set the VP if you want the lifts to work properly.
To set the VP follow this procedure:
Press&Hold the SETUP button for about 3 seconds, until the red SETUP light is lit and you hear 1
short “beep” sound. You are now in the programming mode.
Press&Hold the UP Or DOWN button to set the preferred position.
When you have set your preferred position, press&hold the SETUP button for about 3 seconds, until you
will hear two short „beeps” and the red SETUP light is down. The viewing position is now set.
IR Remote Control assignment
It is possible to assign two selected buttons of your any IR remote control (TV, CABLE, DVD, etc.). Selected
buttons will be used to control the movement of the lift up and down (UP, DOWN)
RJ45 socket
Control Box Front
Control Box Back
Lift to
control box
socket
Lift Power plug
(compliant with
your country standards)
