GB
For every modification of your thermostat, you are supposed to wait for the stabilization of the
temperature inside the unit before proceeding, if necessary, to a new setting� Do change the position
of the thermostat gradually and wait at least 12 hours before re-checking�
NOTE:
after charging the device for fresh food or after repeated or prolonged door openings,
it is normal that the inscription «OK» does not appear in the temperature indicator�
Wait at least 12 hours before readjusting the thermostat�
Install the fridge in a cool place out of direct sunlight and away from cookers, heaters, dishwashers or
any hot air emitting items�
Do not set the temperatures lower than necessary� Set the internal temperature within the correct
range e�g� adjust the thermostat at middle position for 4°C in the fridge compartment�
Let pre-cooked foods cool down before placing them in the fridge� This will prevent the internal
temperature of the fridge from rising�
Keep your fridge full, but not over crowded, this helps reduce «cold» air loss� Meanwhile, avoid
overloading the fridge� Try to leave about 20% free space for air circulation�
To prevent cold air escaping, limit the frequency of opening door� When retuning from shopping,
sort foods to be kept in your fridge before opening the door� Only open the door to put food in or
take it out�
Make sure the door seal is clean and in good condition� It should hold a piece of paper tightly in place
when shut�
The combination of the drawers, baskets and shelves shown in the device description is optimal
for efficient energy savings� Changing the combination proposition could alter the efficiency�
ENERGY-SAVING TIPS
Remove the cover caps from the door outer side
Fix the handle with the provided screws into the underlying holes
Put the screw covers on
Handle Assembling Instruction
This refrigerator can be opened either from the left or right side� The default way of opening the door is
from the right side� If you want to open the door from the left side, please follow the instructions below�
Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
•
If you want to have the door swing reversed, we recommend that you contact a qualified
technician� You should only try to reverse the door yourself if you believe that you are qualified
to do so�
•
Ensure the unit is unplugged and empty�
•
Adjust the two levelling feet to their highest position�
•
To take the door off it is necessary to tilt the unit backwards� You should rest the unit
on something solid so that it will not slip during the door reversing process�
•
All parts removed must be saved to do the reinstallation of the door�
•
The refrigerator inclination angle should be less than 45°�
•
Do not lay the unit fat as this may damage the coolant system�
•
You should rest the Appliance on something solid e�g� a chair just below the top panel�
•
We recommend that 2 people handle the unit during assembly�
Reverse door
1)
Remove the top right hinge cover�
2)
Unscrew and remove the hinge with a cross-slot screwdriver
Follow the following stages to reverse the door from its initial position�
27
26
GB
Содержание MP246WDW
Страница 1: ......
