2. Quick operation guide
For detailed operating method read the corresponding content
on the instruction manual.
Switch on the
appliance
Open the door, Press the Power switch button
to switch on the appliance.
Fill the deter-
gent dispenser
Compartment A:
With each wash cycle.
Compartment B:
For programmes with pre-
wash only.
(Follow the user instructions!)
Check the rinse
aid level
Mechanical indicator C.
Electric indicator on control panel (if provided).
Check the
regeneration
salt level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control
panel (for some models), you can estimate
when to fill the salt into the
softener by the number of cycles
the dishwasher has run.
Load the bas-
kets
Scrape off any large amount of leftover food.
Soften remnants of burnt food in pans, then
load the baskets. Refer to the dishwasher load-
ing instructions.
Select a pro-
gramme
Press the programme button until the selected
programme lights up. (See the section entitled
“Operation instruction”)
Running the
dishwasher
Close the door, turn on the water tap. The
machine will start working.
Changing the
programme
1. A running cycle can only be modified if it
has been running for a short time. Other-
wise the detergent may have already been
released and the water already drained.
If this is the case, the detergent dispenser
must be refilled.
2. Open the door slightly, then press the
program button more than 3 seconds to
cancel the running programme.
3. Select a new programme.
4. Close the door, restart the dishwasher.
71
70
GB
GB