Installation
Before Use
Backout packing
• Remove all the packing (including
the foam base) or the vibration
and noise may occur.
• Dispose all the wrappage safely
and keep them out of the reach of
children. Danger of suffocation!
• It is normal that water drops appear on the packing plastic
bag and the door glass, which are resulted from the water
left in the tub for checking out.
Accessories
Make sure that you have received all of the items shown below.
Accessories Name
Qty. Accessories Name
Qty.
Inlet hose
1
“U” piece
1
Transit bolts
caps
4
Manual
1
Removing transit bolts
• Remove all the transit bolts at the back of the machine with
tools.
• Plug the holes with the transit bolts caps supplied.
Note:
Strong vibration, noise or failures may occur if
the transit bolts are not removed.
Keep the transit bolts for future trans-
portation. Whenever the machine is
transported, the transit bolts must be
refitted.
Installation place requirement
• A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
• The machine must be level and
securely positioned. The distance between the machine and
wall must be more than 10 cm.
• To avoid vibrations during spinning, the machine should not
be installed on soft floor coverings.
Level adjustment
The machine must stand
perfectly level on all four
feet to ensure safe and
proper operation.
Incorrect installation may
increase electricity and water
consumption and may cause
the machine to move about.
Locknuts
Adjustable feet
Loose
Locked
High
Low
Transit bolt
51
50
GB
GB
