Saba HTS-1500, Руководство пользователя

Страница: 28 / 32

28
Other functions
Operating the radio
The receiver has a built-in tuner that allows for AM/FM
radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly （ see
“Connecting the Antenna” on page 12 section for
details
）
2. Press the POWER button to switch on the receiver.
3. Press the SOURCE button to enter TUNER mode.
4. To select band, press the SOURCE button to toggle
between AM/FM modes.
5. Tune the stations by pressing the TUNE or
TUNE buttons repeatedly until the desired station
is found.
NOTE: To activate the automatic search function, press
and hold the TUNE or TUNE buttons for about 2
seconds. In this mode the receiver will automatically
tune frequencies until it finds a station.
Selecting Mono or Stereo Sound
Press the AUDIO (ST/MONO) button on the remote
control to switch between mono and stereo sound in
FM tuner mode (when available).
Note: After pressing the
TUNE or TUNE , MEM
or MEM buttons, the listening mode will
automatically change to stereo.
Storing radio stations:
You can easily enter and store up to 40 AM or FM radio
stations in the receiver’s memory.
Manual preset
1. Select FM or AM band by pressing the SOURCE
button repeatedly.
2. Tune to the radio station to be stored by pressing
the TUNE or TUNE buttons on the remote
control.
3. Press the SLOW/MEMO button on the remote
control. “PROG” and the preset number will appear
on the front panel display.
4. Press the MEM , MEM , or enter the number
buttons （ 0 ~ 9 , >10 ） , while “PROG” is still flashing
to select the desired preset memory location.
5. Press the SLOW/MEMO button on the remote
control to store a frequency in the preset location .
6. Repeat steps 1-5 to store other frequencies.
Retrieving preset stations
1. Press the SOURCE button to select tuner mode.
2. Press the MEM or MEM buttons on the front
panel or remote control to select preset stations.
POWER
SOURCE SKIP//-
POWER
AUDIO(ST/MO)
SOURCE
TUNE +/-
MEM +/-
NUMBER
BUTTONS