Saba HTS-1500, Руководство пользователя

Страница: 17 / 32

17
Basic setup
DOWNMIX setting
This setting will affect the audio output signal when
playing DVD discs recorded with surround multi-
channel audio. To select one of the following Downmix
settings, use the setup menu, select speaker settings
to access the DOWNMIX menu
• LT/RT: For use with an external amplifier or
television with a Dolby Pro Logic decoder.
• LO/RO: For use with a stereo amplifier/receiver or
television with conventional 2-channel
stereo.
Using the test tone mode
We recommend that you use the test tone mode after
you have set up and connected your speakers to check
the balance level and connections of each speaker.
Use the setup menu to select speaker setup, to arrive
at the following screen:
Turn this function to ON to test each speaker
individually with a two second pink sound. The location
of the speaker will be displayed on the television
screen and the front display panel, as each speaker is
being tested.
NOTE: When performing this test, it is common for the
volume of the pink noise from the subwoofer to be
lower than the volume of the pink noise from the
center, front and rear speakers.
Center delay setting
The center delay can be adjusted in Dolby Digital
mode. To change this setting, use the setup menu,
select speaker setup to access the following screen:
SET CENTER DELAY
MAIN PAGE
- - SPEAKER SETUP PAGE - -
TEST TONE
CNTY DELAY
REAR DELAY
DOWNMIX
OFF
3MS
9MS
15MS
Select the desired delay time of the center speaker as
follows: OFF, 3MS, 6MS, 9MS, 12MS, 15MS.
NOTE: The default setting is 15ms. We recommend
that you change it to 9ms.
Rear delay setting
The rear delay can be adjusted in Dolby Digital mode.
To change this setting, use the setup menu, select
speaker setup to access the following screen:
Select the desired delay time of the surround speaker
as follows: OFF, 3MS, 6MS, 9MS, 12MS, 15MS.
NOTE: The default setting is 15ms. We recommend
that you change it to 9ms.