Right
Wrong
Drill holes at the marked points, using a Φ10 mm drill bit and
insert the wall plugs
11
into the holes�
For version
A
, fix 2 screws
10
(5 x 50) into the holes on line B2,
keeping around 10mm out of the wall plug for further hooking
the hood�
Fix the brackets (version B):
Fix bracket
20
on line
B1
and bracket
21
on line
A
with 5 screws
10
(50x50) provided with the unit�
Hook the hood unit
Open the panel and remove the metal grease filter using the
handles provided�
• Version
A
: hook the hood unit on screws
10
on line B2 and
terminate the screwing
• Version
B
: Hook the hood unit on bracket
20
� Check the unit
level in both cases�
• From interior of the hood unit, fix firmly the screws
10
to wall
plugs
11
at the points
(3)
on line C�
• Fit the filter into the hood�
• Close the panel�
32
GB
