Saba FRD396IL, Инструкция по эксплуатации

Страница: 23 / 26

17 16
GB GB
TEMPERATURE INDICATE
In order to help you get the correct adjustment of your device, it is
equipped with a temperature gauge placed in the coldest area.
For the proper storage of food in your refrigerator and in
particular in the coldest area, make sure that «OK» appears in the
temperature indicator.
The symbol on the left side indicates the
location of the coldest area of your refrigerator.
It defines the height of this area.
If «OK» is not displayed, the average
temperature in this area will be very high. You
ought to adjust the thermostat to a colder
setting.
For every modification of your thermostat, you
are supposed to wait for the stabilization of the
temperature inside the unit before proceeding,
if necessary, to a new setting. Do change the
position of the thermostat gradually and wait
at least 12 hours before re-checking.
MAKING ICE CUBES
1. Gently pull out the ice tray and fi l the ice tray with water
to the water level line. The carefully replace the ice tray
horizontally.
2. When the ice cubes are ready, turn the knob clockwise (turn
to the end and release), the ice cubes will drop from the ice
tray into the ice box.
MAINTENANCE
FREEZER DEFROSTING
Note: Care must be taken when performing the following
procedure.
• The appliance is frost free, so there shouldn’t be any
requirement to defrost the freezer.
However, in the unlikely event the appliance does need defrosting
please follow the below steps:
• Try to use as much as possible of the food in the freezer, before
defrosting.
However, any food that is left, wrap in newspaper and place aside
until ready to place back after cleaning.
• Switch the appliance off t the wall socket and remove the plug.
• Open the freezer door.
• Place a suitable container to collect the water created from the
defrosted ice.
• After defrosting, clean and dry the interior.
• Switch the appliance on and replace any frozen food.
Defrosting can be accelerated by putting bowls of hot (not
boiling) water in the freezer and loosening the frost with a
suitable plastic scraper.