GB
All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from
defrosting and spoiling�
All storage recommendations printed on the packaging of frozen food by the manufacturer should
always be followed�
When using the freezer for the first time or after defrosting, set the thermostat knob to the maximum
position for at least 2 hours before introducing food to be stored, and then re-adjust it to the normal
position�
The technical data mentioned in the ‘Specifications’ are obtained in the case that the freezing drawers
are removed�
Install the fridge or freezer in a cool place out of direct sunlight and away from cookers, heaters,
dishwashers or any hot air emitting items�
Do not set the freezer temperatures lower than necessary� Set the internal temperature within the
correct range e�g� adjust the thermostat at middle position -18°C in the freezer respectively�
Let pre-cooked foods cool down before placing them in the fridge or freezer� This will prevent the
internal temperature of the fridge from rising�
Keep your freezer full, but not over crowded, Try to leave about 20% free space for air circulation�
To prevent cold air escaping, limit the frequency of opening door� When retuning from shopping,
sort foods to be kept in your freezer before opening the door� Only open the door to put food in
or take it out�
Make sure the door seal is clean and in good condition� Defrost regularly or when ice is more
than 5mm thick� Thick ice covering the inner sides significantly increases energy use�
STORING FROZEN FOOD
Remove the cover caps from the door outer side
Fix the handle with the provided screws into the underlying holes
Put the screw covers on
ENERGY-SAVING TIPS
Handle Assembling Instruction
This freezer can be opened either from the left or right side� The default way of opening the door is from
the right side� If you want to open the door from the left side, please follow the instructions below�
Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
•
If you want to have the door swing reversed, we recommend that you contact a qualified technician�
You should only try to reverse the door yourself if you believe that you are qualified to do so�
•
Ensure the unit is unplugged and empty�
•
Adjust the two levelling feet to their highest position�
•
To take the door off it is necessary to tilt the unit backwards� You should rest the unit on
something solid so that it will not slip during the door reversing process�
•
All parts removed must be saved to do the reinstallation of the door�
•
The refrigerator inclination angle should be less than 45°�
•
Do not lay the unit fat as this may damage the coolant system�
•
You should rest the Appliance on something solid e�g� a chair just below the top panel�
•
We recommend that 2 people handle the unit during assembly�
Reverse door
Follow the following stages to reverse the door from its initial position�
1)
Remove the top right hinge cover
2)
Unscrew and remove the hinge with a cross-slot screwdriver
25
24
GB
Содержание CV176W
Страница 1: ......
