18
1
In “Satellite” item, press[
Left/Right
]key to
switch satellite that you want to scan or
press[OK]key to enter satellite list for
selection.
2
In “TP Index” item, you not only can use
[
Left/Right
]key to select transponder but also
can use[Add] and [Delete]functions.
When you press[Green] key, it will display
“New TP” in “TP Index” item; You should
set the parameters of “TP Frequency” and
“Symbol Rate” for this new transponder.
The parameters of “TP Frequency” and
“Symbol Rate” can set by number keys.
The available range are “3000~13450
MHz” and “1000~45000Ks/s”.
When you press[Yellow] key, there will
show up a warning message for reminding
whether you will delete the current
transponder or not. If you select “Yes”, the
current transponder will be deleted, and the
total account of transponder will reduce 1
correspondingly.
When you press [Blue] key, there will show
up a warning message for reminding
whether you will delete all transponders or
not. If you select “OK”, all transponders will
be deleted.
3
For the existed transponder, you also can
use number keys to modify the parameters
of “TP Frequency” and “Symbol Rate”.
4
When you complete your modification,
Press [Red] key, it will show up a dialog to
ask you scan mode, program type, scan
type and NIT Search on/off. After you set
up, press [OK] key to start scanning.
5
In the “TP Scan” item, press [Exit] key to
exit the scanning and save the current
parameters.
Single Scan
1
Press [Red] key, it will show up a dialog to
ask you scan mode (means you want to
scan all channels or only scan free
channels), program type (means you want
to scan all channels or only scan TV/Radio
channels), scan type (means preset scan,
that is searching the existed TP. Automatic
Scan means blind scan. It is no need
existed TP info) and NIT Search on/off.
After you set up, press [OK] key to start
scanning.
2
Press [White] key into the blind scanning
immediately.
TP Scan
Press [Green] key to scan current TP’s
programs.
Auto DiSEqC
Press [Blue] key to run Auto DiSEqC function, it
can find the satellite connect to which port
automatically.
Blind Scan
Press [White] key can directly into blind scan
mode to scan the current satellite.
