SAB Heli Division Goblin 700, Руководство пользователя

Страница: 5 / 48

Chapter 3, Components and Box
Copyright@2012 – SAB Heli Division – All rights reserved
Page 3
ADDITIONAL COMPONENTS REQUIRED
• Electric Motor:
10S-12S – 400-600Kv
Maximum diameter 64mm,
Maximum height 64mm, pinion shaft diameter 6mm
• Speed controller:
minimum 120A to be safe
•
Batteries: 10-12S 4000-5000mAh
•
1 flybarless 3 axis control unit
•
Radio power system, if not integrated with the ESC.
•
3 cyclic servos
•
1 tail rotor servo
•
6 channel radio control system on 2.4 GHz
(See the configuration example on page 28)
TOOLS, LUBRICANTS, ADHESIVES
•
Generic pliers
•
Hexagonal driver, size 1.5,2,2.5,3,4mm
•
4mm T-Wrench
• 5.5mm Socket wrench (for M3 nuts)
• 8mm Hex fork wrench (for M5 nuts)
• Medium threadlocker (eg. Loctite 243)
• Strong retaining compound (eg. Loctite 648)
• Spray lubricant (eg. Try-Flow Oil)
• Synthetic grease (eg. Tri-Flow Synthetic Grease)
•
WD40 Lubricant
•
Cyanoacrylate adhesive
•
Pitch Gauge (for set-up)
•
Soldering equipment (for motor wiring)
Inside the main box there are:
The assembly process
is described in the following chapters
of this manual.
Each phase begins with a green frame which gives the
box, the bag with screws (and miscellaneous items), and
the foam tray with the components required for the
phase.
Inside the main box:
Box 2 : Canopy, Blade Holder.
Box 3 : Boom, Blades, Tail blades, Carbon rod.
Box 4
: Mechanical parts in 4 trays:
Tray 1: Main rotor
Tray 2: Carbon frame and tail rotor
Tray 3: Transmission
Tray 4: Main structure
Box 5 : Bags
Box 6 : Carbon parts
Box 7 : Combo Kit (optional)