5
START/STOP BUTTON
Starting the Engine
With the remote control in the vehicle and
the vehicle in Park or Neutral, press the
brake pedal and then press the START/
STOP button to start the engine.
Note: If the remote control battery is weak,
place the remote control in the pocket near
the cupholder in the center console to
enable the engine to start.
Stopping the Engine
With the vehicle stopped, press the brake
pedal, shift to Park and then press the
START/STOP button to turn off the engine.
Accessory Power Mode
With the engine off and without pressing the
brake pedal, press the START/STOP button
once to operate some accessories.
Ignition On Power Mode
With the engine off and without pressing the
brake pedal, press and hold the START/
STOP button for 3 to 5 seconds to operate
all electrical functions.
See Driving and Operating in your
Owner´s Manual.
REMOTE ENGINE START
3
If available, this feature allows the engine to
be started from outside the vehicle with the
remote control.
The button
O
will be on the remote control
if the vehicle has remote engine start.
Starting the Engine
• The selector lever has to be in P and the
vehicle has to be locked .
• Press and hold
O
until the turn signal
lamps flash. This confirms the request to
remote start the vehicle has been
received. Once the engine is started, the
parking lamps will turn on and remain on
as long as the engine is running.
• Unlock the vehicle by pressing
c
before
entering.
• Press button Start/Stop once, press
brake pedal and and move selector lever
out of P to drive the vehicle.
The remote engine start has an approximate
range of up to 50 ft (15 metres). It can be
restricted by external influences.
To switch off the engine after a
Remote Engine Start
• Press and hold
O
until the parking lamps
turn off.
• Turn on the hazard warning flashers.
• Turn the ignition on and then back off.
See Driving and Operating in your
Owner´s Manual.
QG_9-5_RoW_MY11 USA-varianten med poslista.fm Page 5 Friday, August 27, 2010 9:46 AM
