Saab 900 Convertible, Руководство пользователя

Страница: 29 / 60

Convertible Top Troubleshooting Guide
Squeaks Rattles
Clicking/snapping noise from the 1st bow header
(Note: noise comes from the corner where the header meets the side rail.
The noise disappears with the latch released.)
Loose bolts at front side rail?
Remove bolts, Loctite and retighten 3 bolts.
Tighten bolts as per Customer Satisfaction Campaign 428, item D,
page
8.
If these screws have been loose for some time, the pop rivet may have
worked loose. Drill reinstall a new pop rivet.
There must be
2. from “pull down” handle at center of 1st bow
Loose fit between handle and opening in first bow?
Remove handle. Grind off the small ribs at the outer edges of the handle.
Wrap outside of handle with felt tape, P/N 96 98 846.
3. Rattle from Tonneau cover with top raised and 5th bow latched
Welting at lower edge of 5th bow fabric rubbing on Tonneau?
Gently tap on the edge of the 5th bow to re-form the metal surface of the 5th
bow. The
rubber sea\, not
the fabric, should contact the Tonneau cover.