Saab 2008 9-3 Remote Starter, Руководство пользователя

Страница: 176 / 320

176 Starting and driving
TCS indicator
When the ignition switch is turned to the ON
position, the lamp is lit for about 4 seconds
while the system performs self-diagnosis.
The light comes on when the TCS is
operative, that is when one of the wheels
has lost its grip.
The fact that the TCS is operative indicates
that the limit for grip has been exceeded and
that the driver must exercise greater care.
Temporarily turning the TCS off
The TCS is switched on automatically when
the engine is started.
It may be necessary to switch off the system
if the car has become bogged down, for
instance.
If a fault is detected in the ABS, the TCS will
be switched off automatically.
The cruise control system (if active) will
automatically be disengaged if the TCS is
operative.
Disengage the system in Settings.
1 Select Settings using the steering
wheel buttons, or .
2 Hold the SET button depressed until a
chime sounds.
3 Select TCS .
4 Press the SET button.
5 Select ON or OFF .
End by pressing the SET-button.
Go back/undo using the CLR-button.
93_US_M08.book Page 176 Friday, May 11, 2007 11:37 AM