background image

12 832 511 3

Saab 9-3 CV M04-

Bus Communication

Many parts of the car's electrical system communi-
cate using a bus. There are three types of bus
communication: P-bus (Powertrain Bus), I-bus
(Instrument Bus) and O-bus (Optical bus). The
audio system communicates via the O-bus together
with the navigation system, the telephone system
and others.
The O-bus is optical and is a ring bus. Two fibre
optical cables are connected to each control module
on the bus, one fibre optical cable for receiving and
one for sending. Messages received are converted
by each control module from a fibre optic signal to
electrical and then converted back to optical for
sending. The O-bus data transfer rate is 25 Mbit/s.

AMP1 is an amplifier behind the left-hand rear side
trim
AMP2 is an amplifier by the REC
CDC is a CD changer by the REC
DVD is a DVD player by the REC

When fitting new equipment to be connected to the
O-bus it is important that it is connected into the
correct side of the existing equipment.

Important

It is very important that everything connected to the
O-bus is connected in a specific order, see illustra-
tion, and that the ring is closed the whole time.
Connection in any other way than that described
in these fitting instructions may result in several of
the car's systems failing to work.

F930A100

1

2

CDC

1

2

DVD

1

2

AMP2

1

2

1

2

AMP2

CDC

1

2

1

2

AMP2

DVD

1

2

1

2

DVD

CDC

1

2

1

2

1

2

AMP2

DVD

CDC

2 1

Important

Handle the fibre optic cables with care or the
signal may be distorted.

·

It is very important that the two leads in the
connector are not confused with one another.

·

Do not splice the cables.

·

Do not bend the cable in a radius smaller than
25 mm.

·

Do not expose the cable to temperatures
exceeding 85 °C.

·

Keep the cable ends free from dirt and grime.

·

Do not expose the cable to impact as this may
cause the transparent plastic to whiten, thereby
reducing the intensity of the light and causing
possible communication interruptions.

·

The cable should not lie against any sharp
edges as this may cause increased signal
reduction.

Содержание 12 832 501



























Отзывы: