51
WÄRMESCHUTZSCHALTER - TABELLE
Mod.
Art. Nr.
V.
Einstellung des Stromrelais (A)
1
SA-033-M
230
2,9
2
SA-050-M
230
3,8
3
SA-075-M
230
4,0
4
SA-075-T
230/400
2,4 / 1,6
5
SA-100-M
230
6,2
6
SA-100-T
230/400
4,7 / 2,7
7
SA-125-M
230
7,6
8
SA-125-T
230/400
6,1 / 3,5
• Für einphasige 230 V-Pumpen verwenden Sie einen H07 RN-F3 1,0 mm
2
Anschlusskabel für SA-033-M, SA-050-M und SA-075-M, und für SA-100-M und
SA-125-M einen 1,5 mm
2
.
• Für dreiphasige Pumpen verwenden Sie einen H07 RN-F5 1,0 mm
2
Anschlusskabel.
• Bevor Sie den Motor anlassen, überprüfen Sie bitte die Sicherung.
• Beim Dreiphasen-Motor stellen Sie das Thermorelais entsprechend den Angaben
der Wärmeschutzschalter-Tabelle ein. Für die Verbindung im Dreieck (3 x 230V-
Netz) gilt der höhere der genannten Werte. Für ein eine Y Verbindung (3 x 400V-
Netz) gilt entsprechend der niedrigere Wert.
• Bei anderen Spannungen von 230V (zwischen 220v und 240v) und 400V (zwischen
380v und 420v) schliessen Sie die niedrigere Spannung im Dreieck, die höhere in
Y an.
• Beachten Sie beim Einbau der Anlage die korrekte Verlegung und Verbindung der
Erdungsleitung.
• Bei Missachtung der Anleitungen zu Einbau und Elektoranschluss lehnt der
Hersteller jede Verantwortung ab und die Garantie geht verloren.
• Die Motoren entsprechen den EU-Normen mit Schutzklasse IP-55
• Es können besondere Einbau-Richtlinien bestehen.
• Das Netzkabel ist nur von autorisiertem Fachpersonal anzuschließen. (Anschlussart
Y).
• Falscher Netzanschluss kann lebensgefährlich sein!