4
DURING USE
OPERATING THE SA POWERNET EX SPLITTER UNIT
Position and set up the Splitter Unit according to the previous instructions.
Check that the Splitter Unit is safe for use and has no defects, paying particular attention to the
external cables and the electrical enclosures.
The Splitter Unit can then be connected to the correct supply. The supply voltage should be within the
voltage range shown on the product type label.
The supply voltage should not vary by more than +/-10% of the voltage on the product type label.
Maximum current is 16A unless otherwise stated on the marking label. Please ensure that the
equipment connected does not exceed the maximum rating of the splitter unit.
Please ensure that the equipment used has the correct plugs to correlate to the Splitter Unit sockets.
Forcing incompatible sockets will damage the unit and invalidate the warranty/certification.
If the Splitter Unit gets damaged during use it must be immediately disconnected from the supply and
removed to a safe area for inspection and test. Correct use of the equipment should help to ensure
that it is not damaged. If you would like more information on ancillary products, please contact the
Sales Team on +44 333 240 6111 or [email protected].
AFTER USE
INSPECTION & MAINTENANCE PROCEDURES
Maintenance may be carried out only outside the EX area.
Isolate the Splitter Unit from the mains supply and allow to cool before carrying out any maintenance
work.
The Splitter Unit should be cleaned when necessary using a damp cloth. If necessary use neutral
soap. No detergents or solvents are allowed. Do not allow dirt and/or dust to accumulate on the
equipment.
Operator is responsible to comply with the all applicable regulations including:EN60079-14,
EN60079-17 and EN60079-19.
Basic repairs can be carried out by a competent electrician.
No repairs to individual components used are permitted.
No user modifications are permitted and only original spares from SA Equip must be used. The use of
any other parts will invalidate any warranty and could compromise the safety and functionality of the
equipment.
Exploded-view diagram and spare parts list are available on request. SA Equip offer a full repairs
service. Contact the SA Service Centre on +44 (0)333 240 6111 for more details.