S9v 43’ Installation Guide
___________________________________________________________________________
________________________________________________________________________
13
j. Refer to the figures, below. Pull a small U-shaped portion of the wire
through the exit hole and STOP. Carefully remove the hook tool. Then,
hold the top part of the wire firmly in one hand while you use your other
hand to pull the bottom loose end of the wire out through the exit hole. Do
not pull on the top part of the wire – just pull on the lower, loose end!
1. Hold top part of
w ire firmly. Do
not pull on this
part of the wire.
2. Use your other
hand to pull the
loose end of the
w ire out of the
base tube
Top of Antenna
Bottom of Antenna
