S3 0312FC, Руководство оператора

Страница: 5 / 58

Page | 2
2 Introduction
Congratulations on your purchase of a S3 AIR
SYSTEMS Aeration Fan. Our fans represent the top
of the line in Aeration Equipment. This fan has been
engineered to provide optimum performance for
your aeration needs.
This manual should be read in its entirety as your
first source of information about the machine. If all
the instructions are followed in this manual, you
will mitigate the potential of any premature and
unexpected failures.
Keep this manual handy for frequent reference.
Contact your local supplier dealer if you need
assistance. The following information is necessary
for prompt and accurate assistance:
Please read all instructions and warnings
thoroughly.
If, after studying this manual, you are unable to
install or service your aeration fan, please contact
the supplier from which you purchased the unit. Be
prepared to provide the information listed on the
Serial Plate as well as the details of application, i.e.
bin diameter and type, grain depth and type, etc.
If further assistance is required, your dealer will
refer you to the S3 AIR SYSTEMS Customer Service
Department at 1-844-441-2020 for immediate
attention.
3 General Information
S3 AIR SYSTEMS Centrifugal Aeration Fans sold by
S3 AIR SYSTEMS are 100% CSA certified fans and
components designed primarily for use in grain
aeration or grain drying systems. All units are
driven by electrical motors which are rated for
continuous duty. Both fan housing and frame are
fabricated of steel while the rotor is aluminum. The
rotor has a unique blade design and is mounted
directly to the motor shaft. A concentric circle
screen guard covers the air inlet to comply with
safety requirements and minimize exposure to any
related safety risks.
S3 AIR SYSTEMS reserves the right to modify design
of the S3 AIR SYSTEMS Aeration Fan in whole or in
part without notice.