Evaporative Air Cooler
17
FAN and COOL functions will be turned on automatically, use
button to change speed.
(as shown in picture 9-6), the current relative humidity is 56%, preconcerted relative humidity is 60%,
FAN and COOL functions been turned on.
The default temperature on AUTO% mode is 60%, if want to change, press
button, the
preconcerted temperature will flash(as shown in picture 9-7), use
buttons to change,
press
button again, the setting been finished. (as shown in picture 9-8). The relative humidity has
been change to 57%.
Picture 9-6 AUTO% mode Picture 9-6 set relative humidity
Picture 9-8 Finish the setting
10.
PRE-COOLING MODE
If your wall controller is designed to allow for the saturation of the cooler’s cooling pads before the fan
is switched on. The default of pre-cooling mode is closed.
On the state of shutdown, press the buttons of
and
for 5 seconds, can turn on and turn
