S2Konnect N-2020SX, Руководство пользователя

Страница: 7 / 24

S2Konnect N-2020SX
7
Safety Precautions
To protect yourself from injuries and avoid damage of the device, always observe the following
safety instructions when installing the network adapter.
Avoiding injuries
Electrical current!
Electrical current from power, phone, and communications cables can be hazardous.
Never touch any electrical elements with bare hands.
To avoid potential shock hazards:
•
Do not carry out any installation, maintenance, or (re)configuration work during a
thunderstorm.
•
Do not connect or disconnect any power cables during a thunderstorm.
•
For installation in a Hot-Plug system, observe the safety instructions specific to this sys-
tem. Read the relevant documentation first.
•
Do not connect the network adapter to a telephone line.
Electrical installations must comply with the safety regulations of the country in which they are
operated.
Avoiding damage
Electrostatic discharge!
Electrostatic discharge may damage or destroy the Network adapter.
To avoid damaging the S2Konnect N-2020SX Dual Port Server Adapter observe the following:
•
Switch off the computer.
•
Disconnect the power cord from the power outlet.
•
Remove the computer cover.
•
Before installing the network adapter, put on an antistatic wrist strap (electrically conduc-
tive).
•
Connect the wrist strap to the computer chassis
Do not connect the wrist straps to the ground terminal of the power supply!
Faulty wiring could make this terminal live and potentially lethal.
•
When you are ready to install the network adapter, open the antistatic bag.
•
Hold the antistatic packaging of the network adapter against the bracket of an expansion
slot on your computer for at least two seconds.
This reduces the static charge in the packaging and in your body.
If you need to place the network adapter somewehre after removing it from the antistatic
bag, make sure you place it on the antistatic bag and on a level surface.
Do not place the network adapter on the computer cover or on any other metal surface.
•
Cautiously insert the adapter into the corresponding slot.
Do not touch any circuits on the network adapter or any of its port contacts.

!
i