S+S Regeltechnik PREMASGARD 121 Modbus Series, Инструкции по эксплуатации, монтажу и установке

Страница: 15 / 32

15
G
PREMASGARD ® 121x - Modbus | Telegrams
Function 04 Read Input Register
Register Parameter Data Type Value Range
3x0001 Differential
pressure
Without filtering Signed 16 Bit – 1000 ... + 1000
– 5000 ... + 5000
– 1000 ... + 1000 Pa
– 5000 ... + 5000 Pa
3x0002 Differential
pressure
1 sec. filtering Signed 16 Bit – 1000 ... + 1000
– 5000 ... + 5000
– 1000 ... + 1000 Pa
– 5000 ... + 5000 Pa
3x0003 Differential
pressure
10 sec. filtering Signed 16 Bit – 1000 ... + 1000
– 5000 ... + 5000
– 1000 ... + 1000 Pa
– 5000 ... + 5000 Pa
Function 05 Write Single Coil
Register Parameter Data Type Value Range
0x0001 AutoZero Bit 0 0 / 1 ON - OFF
Function 08 Diagnostics
The following sub function codes are supported
Sub Function
Code
Parameter Data Type Answer
00
Echo of transmission data
(Loopback)
Echo data
01
Restart Modbus
(Reset listen-only mode)
Echo telegram
04 Activation listen-only mode No answer
10
Delete counter Echo telegram
11
Counter bus telegrams Unsigned 16 Bit All valid bus telegrams
12
Counter communication errors
(Parity, CRC, frame errors, etc.)
Unsigned 16 Bit Faulty bus telegrams
13 Counter exception telegrams Unsigned 16 Bit Error counter
14 Counter slave telegrams Unsigned 16 Bit Slave telegrams
15 Counter telegrams without answer Unsigned 16 Bit Broadcast messages (address 0)
Function 17 Report Slave ID
Composition of answer telegram
Byte No. Parameter Data Type Answer
00 Number of bytes Unsigned 8 Bit 6
01 Slave ID (device type) Unsigned 8 Bit 7 = PREMASGARD ® 1214 (1.5 %)
02
Slave ID (device class) Unsigned 8 Bit 30 = PREMASGARD ® / PREMASREG ®
03 Status Unsigned 8 Bit 255 = RUN, 0 = STOP
04 Version number (release) Unsigned 8 Bit 1...9
05 Version number (version) Unsigned 8 Bit 1…99
06 Version number (index) Unsigned 8 Bit 1