S.R.Smith WPC1 Series, Руководство по установке

Страница: 10 / 16

10
E X T E R N A L M A G N E T I C A N T E N N A M O U N T I N G
The WPC-1 is equipped with an external antenna that can be mounted up to 3 meters from the
WPC-1 unit. The antenna is required as the WPC-1 enclosure is metallic and will block the RF signal
from the remote control.
The antenna has a magnetic base and may simply be placed on top of the WPC-1 enclosure.
If moving the antenna elsewhere within 3 meters is desired due to the location of the WPC-1, use the
included 90 degree, wall mounting bracket to raise or move the antenna into a clear receiving zone.
While not required, best range performance is found when the remote and the antenna are within line
of sight and 100’ or less.
NOTE: The remote function of this device operates through radio frequency (RF) signals.
As with any RF device, this is subject to interference through surroundings and installation location.
In the event of an interference issue or if longer range is required, the 3 meter magnetically mounted
antenna may be removed and a 15 meter accessory antenna kit may be used to extend the RF antenna
towards the use area - part number pLX-ANTKT-L . Like any radio device, experimentation may be
required to locate the best reception or RF friendly spot.
3 METER LONG ANTENNA CORD