79-15159-00 REV B2 9.14
www.srsmith.com
Page 6 of 6
IMPORTANT NOTICE
Note: DO NOT INSTALL THE BUBBLER TIP MORE THAN 4 INCHES ABOVE THE
GUNITE SURFACE AREA. THE INTERIOR OPTIC ROD IS 4 ¾” DOWN FROM THE
TIP’S TOP AND WILL BE DAMAGED IF TRIMMED FOR FLUSH INSTALLATIONS
BELOW THIS LEVEL.
The Color Light Stream™ Lighted Bubbler is designed so that the tip of the bubbler is
approximately 4-8 inches underwater but can be deeper as long as the water supply volume can
be increased.
Keep in mind that the deeper the tip is underwater the less the lighting effect will be above the
water.
SR Smith recommends that during installation the Color Light Stream Lighted Bubbler tip is
capped off with tape, etc. so that no debris gets into the internal area of the bubbler.
The Color Light Stream Lighted Bubbler may be installed in many different methods and
applications, such as:
Flush with interior surface (described above)
Raised off the surface area but with the tip under the water surface – typically fountains
Raised above the water surface – typically fountains
After connecting the fiber to the LED Driver and the completion of all steps indicated above,
turn on the water supply.
Adjust the water volume to achieve the desired water flume/lighting effect.
For additional questions please contact SR Smith Customer Service Pool & Spa Division.
