S.P.E. 24-CBHF2M-3625FLEX, Руководство пользователя

Страница: 8 / 16

7
Drill two or four holes into the wall
and fasten charger with 2 or 4
screws. Do not tighten the screws
all the way so that the charger can
hang on the screws.
WALL - MOUNT INSTALLATION
Ver: 009 - 008 - 001
ELECTRONIC BATTERY CHARGER - OPERATING MANUAL
CONTROL COMPONENTS
The display shows:
• Charging current (A)
• Battery voltage (U)
• Amp-Hours returned (C)
• Elapsed time (h)
• Active charge profile is displayed when button is pressed.
• To enter the charging parameter menu, see CHARGING SETTINGS .
OPERATION
Connect the AC power cable supplied with the battery charger to the charger.
Connect the battery to the charger with the correct polarity. Then, plug the AC
power cord into the wall receptacle.
The LCD display of the battery charger will now show, in sequence, information
related to the internal programming of the charger: the software version in-
stalled on the charger (e.g., Ver 009-008-001):
WALL
FLOOR
>
Maximum height 150cm (59 1/16")
Minimum height 30cm (11 13/16")