S.P.E. 24-CBHF2M-3625FLEX, Руководство пользователя

Страница: 3 / 16

2
9) Do not use the battery charger outdoors.
10) Do not expose the battery charger to rain, water splashes or steam.
11) Do not install the battery charger in caravans and / or similar vehicles.
12) Do not install the battery charger near any heat sources or in areas with high
concentrations of dust.
13) Do not install the battery charger near any potential sources of flammable
material, for example methane gas pipes or fuel depots (petrol, kerosene, ...).
14) Do not place and/or fit the battery charger onto surfaces manufactured out
of combustible materials, like wooden shelves or walls.
BATTERIES
15) Follow the specific safety instructions provided by the battery manufacturer
carefully, for example, whether to remove cell caps during charging and the
recommended charge rates.
16) Working in the vicinity of a lead-acid battery is dangerous, as batteries
generate explosive gases during charging. Therefore, smoking and/or
generating open flames and/or sparks must be avoided.
17) Never charge a frozen battery.
18) Batteries must be charged in specific, well-ventilated areas.
19) In order to reduce risk of injury only charge Lead–Acid, GEL or AGM type,
Lithium Polymer or Lithium-Ion batteries. Do not charge other types of
rechargeable or non-rechargeable batteries as they could explode causing
damage and/or injury.
FURTHER SPECIFICATIONS FOR LITHIUM BATTERIES
20) In order to charge Lithium Polymer and Lithium-Ion batteries, a BMS (Battery
Management System) must always be used, comprising an active and
passive safety system, in compliance with safety regulations in force.
21) The possibility of the BMS acting directly on the battery charger operation
during cell balancing phases rules out, for any reason whatsoever, that the
battery charger is held directly responsible should damage caused to the
battery, or even a fire or an explosion, be due to an error in the BMS software.
22) The faculty offered by the materials produced by S.P.E. ELETTRONICA
INDUSTRIALE to select different levels of voltage for charging, is entrusted
to the control and supervision of the end user and S.P.E. ELETTRONICA
INDUSTRIALE is not liable for any consequences resulting from the selection
of the incorrect level of voltage. If in doubt, the user should ask a qualified
professional for clarification.