22
Terms of use
3.1
Usage agreement for the
LEICHTmount 2.1 E/W
We wish to point out that the installation system is sold under a purchase agreement.
Its installation, processing or purchase by third parties does not take place on behalf of S:FLEX GmbH.
Installation/processing of the system must be carried out in strict accordance with the installation instructions.
The design and planning of the system must be carried out using the S:FLEX planning software (Solar.Pro.Tool). S:FLEX
GmbH is not responsible for the project-related structural analysis of the roof structure, for obtaining and documenting
the roof manufacturer's approval for the attachment of the corresponding fasteners on the respective roof (in terms of
warranty ramifications), or for correct installation of the system.
Faults and damage or impaired/inadequate functioning of the system that are the result of faulty installation and/or
failure to observe the installation instructions and/or the project report (Solar.Pro.Tool) shall not constitute a defect for
which S:FLEX GmbH is responsible. In the case of faulty workmanship by the purchaser or third parties, the rights of
the purchaser to assert claims due to a defect in the goods shall expire.
The system warranty is only valid if all system components are purchased from S:FLEX GmbH.
The system requires that the modules may also be mounted in the indicated manner (i.e. clamped on the modules'
shorter side). This approval can either be given generally as part of the module certification or, as the case may be,
issued by the module manufacturer on a project-specific basis.
© S:FLEX GmbH 02/2017/ Subject to technical modifications
S:FLEX GmbH
•
Reinbeker Weg 9 21029 Hamburg Tel. +49-(0)40-68893170
•
Sasbacher Straße 7 79111 Freiburg Tel. +49-(0)761-888 56 08-0
[email protected] www.sflex.com
